E-5000 Yard Hydrant
Leaking From the Nozzle?

Customer Support | Troubleshooting Guide

A simple guide to help stop a leak from the nozzle.

Is Your Hydrant Actually Leaking?

A little water draining after shutoff is normal. If it keeps leaking after drainage stops, follow these steps.

Don't Dig Up Your Yard Hydrant!

Most nozzle leaks can be fixed from the top. Digging is usually only needed if the valve body or standpipe is damaged.

What You'll Need

One 7/16" wrench

How to Fix It

  1. Find the Adjustment Bolt

    Location of the E-5000 adjustment bolt just below the handle

    Locate the hex-head bolt that holds the pivot connector in place, just below the handle.

  2. Loosen the Bolt

    Loosening the hex-head bolt with a 7/16-inch wrench

    Using a 7/16" wrench, loosen the hex-head bolt just enough to let the pivot connector move.

  3. Lower the Connector

    Moving the E-5000 pivot connector slightly downward

    Move the pivot connector down slightly. This lowers the plunger inside the hydrant.

  4. Tighten the Bolt

    Tightening the bolt to secure the pivot connector

    Tighten the hex-head bolt to hold the pivot connector in its new position.

  5. Turn On, Then Off

    Testing the hydrant for continued leaking from the nozzle

    Turn the hydrant on, then shut it off. Check whether water continues leaking from the nozzle.

Need Help? We're Here for You.

Our team can help with troubleshooting or replacement parts.

800-831-6962
Contact Merrill →

Repair Kits Available

Find replacement parts for your E-5000. Match the kit to your hydrant's model and packing gland.

View E-5000 Parts →
Merrill PKEF parts kit for the E-5000 yard hydrant