Skip to next element
1Loosen Bolts Slightly
- Loosen bolts evenly
- Relieve pressure on gasket
- Do NOT remove bolts
2Lift & Wiggle
- Pull upward gently
- Wiggle side-to-side
- Break seal free from casing
3Tap If Needed
- Use a hammer or pry tool carefully
- Tap lightly around the seal
- Do not force aggressively
- Choosing a selection results in a full page refresh.
{"statementLink":"","footerHtml":"","hideMobile":false,"hideTrigger":false,"disableBgProcess":false,"language":"en","position":"left","leadColor":"#146ff8","triggerColor":"#146ff8","triggerRadius":"50%","triggerPositionX":"right","triggerPositionY":"bottom","triggerIcon":"people","triggerSize":"medium","triggerOffsetX":20,"triggerOffsetY":20,"mobile":{"triggerSize":"small","triggerPositionX":"right","triggerPositionY":"bottom","triggerOffsetX":10,"triggerOffsetY":10,"triggerRadius":"50%"}}
true
